Nondestructive Test Systems

Northeast Technology Sales LLC

Home • Suppliers • Search • Supplier Addresses • Contact NTS • Site Map

(Up to parent page) • Thickness & Profile Systems • Nondestructive Test Systems

Nondestructive Test (NDT) Systems

detect internal defects: unbonded areas, de-laminations, voids, blisters, lack of fill, etc.
sheet goods and web-based products
gypsum, wood, plywood, rubber, plastics, foams, laminates, tires, etc
nondestructive non-contact ultrasonic technology
can be interfaced to mill control systems
continuous testing at process speeds eliminates manual sample testing
AIC designs, builds and installs complete systems on a Proof of Performance basis

	56510 Series Ultrasonic Scanning Systems Detect internal lack of fill, blisters, unbonded areas Stand alone or integrated with AccuScan QA System Defect detection at full process speeds
	5600 Series Internal Defect Detectors Product inspection 3.5+ inch thick Crisp definition of defect edges and boundaries variable frequency transmitters interfaces with Mill Net Systems
	5600 Example Displays
	5650 Series Quality Assurance System Engineered wood flooring System delaminations, glue dry-outs internal splits and knot holes 600 feet/minute
	Nondestructive testing technology for gypsum board lines Locate internal lack-of-fill and blisters non-contact, non-intrusive, non-nuclear
Advantages of the Automation Industries Series 5600 (pdf)
	Model 506 Industry work horse since 1973 200+ installations Detects internal lack-of-bond defects, user settable 2" through 16" Scan zones: standard up to 12, specified up to 24 Standard process line widths 4', 5', 8', 12'

Home / Suppliers / Search / Supplier Addresses / Contact NTS / Site Map

Northeast Technology Sales LLC

19 Robins Run

Gansevoort, NY 12831

T: 518.745.1349

E-Mail NTS

Conditions (Terms) Of Sale: All manufacturers impose legal limitations regarding the sale of their products and how they are used. Be sure you read and understand these restrictions before purchasing or using any product. Warranties, if any, are those of the manufacturer. All purchases are directly from the manufacturer or their distributors: Northeast Technology Sales LLC is a manufacturers' agent and has no authority (legal or otherwise) to change the conditions of sale, pricing, product specifications, installation procedures, operating instructions or warranty provisions.
Product photographs are intended for general illustration only and are not to scale. Specific models may differ.
Descriptions are believed accurate but, should not be relied upon for specific model selection. Most products are available in several configurations. Always consult the manufacturer's current product specifications, mechanical drawings, installation guidelines and instructions for the specific parts you plan to use in your application.
Proper operation of components, systems and safety controls requires an in-depth understanding of sound engineering and design practices, applicable safety regulations, laws and standards. It is vitally important to understand the operation and stopping times of the machinery as proper installation is critical to maintaining the safety function. Installation and verification of safe operation is the responsibility of the machinery manufacturer and user. All products must be installed and used in accordance with the manufacturer's specifications, instructions and directions. Northeast Technology Sales LLC does not provide installation, design, application or engineering services and assumes no responsibility for injury or damage.
Product information, photographs and drawings are provided by their respective companies, and are protected by Copyright or Trademark.