Northeast Technology Sales LLC

Home • Suppliers • Search • Supplier Addresses • Contact NTS • Site Map

Structural Profile Components

(Up to parent page)

A Lex Products catalog.pdf Download complete catalog from link at left or individual sections from table below:
 32 and 40 mm basic sizes Profiles

  • All profiles use same connection hardware!

  • high strength, rigid profiles reduce need for extra diagonal bracing

  • All structural profiles are extruded from type 6005 T5 or 6063 T6 material (32 mm series)

  • Yield - RM min. 200 n/mn3 - 35,000 PSI min. (6005 T5)

  • Tensile strength RM min. 250 n/mn2 - 38,000 PSI min. (6005 T5)

  • Brinell Hardness approximately 75 HB 2.5/187.5

  • Anodizing - unless otherwise specified all A Lex extrusions feature etch and clear anodizing - depth (.0003 inch)

  • Twist not to exceed 1/4° per foot

  • Straightness .0125/ft (3mm)

  • 6005 T5 and 6036 T6 are generally stable in ambient temperature range of -40°c - 200°c

  • A_Lex Products stronger profiles greatly simplify designs, reducing material and assembly costs.

 

Concave wall feature creates lock washer effect to resist loosening
Corner profiles have reinforced inside corner to maintain alignment of cross braces
 Multiple sizes of standard profiles
specialty profiles: round, trolley, 3-sided, bevel, etc.
clear anodizing standard; custom anodizing available (black, etc.)
Standard fastener Connection Hardware
  • Common fasteners fit all profiles simplifying inventory
Accessories
  • Brackets
  • Panels
  • Hinges
  • Joining Plates
  • Feet, Casters
  • Pneumatic plates
  • Cylinder mounts
Linear Motion Components

  • UHMW Glide Blocks

  • LM 1O Linear Rail System

 

 Workstations & Tool Supports
  • Workstations built to customer requirements using modular framing components.
Tools, fixtures & Services 
  • Ease of construction is an important design criteria of the system. One jig, one tap, two drills and a few hex wrenches are all that is needed to assemble or disassemble even the most complicated structures.
  • CAD Files (DXF)  A Lex Products CAD Files

Home / Suppliers / Search / Supplier Addresses / Contact NTS / Site Map

 

Northeast Technology Sales LLC

19 Robins Run

Gansevoort, NY 12831

T: 518.745.1349

E-Mail NTS

  • Conditions (Terms) Of Sale: All manufacturers impose legal limitations regarding the sale of their products and how they are used.  Be sure you read and understand these restrictions before purchasing or using any product.  Warranties, if any, are those of the manufacturer.  All purchases are directly from the manufacturer or their distributors:  Northeast Technology Sales LLC is a manufacturers' agent and has no authority (legal or otherwise) to change the conditions of sale, pricing, product specifications, installation procedures, operating instructions or warranty provisions.

  • Product photographs are intended for general illustration only and are not to scale.  Specific models may differ.

  • Descriptions are believed accurate but, should not be relied upon for specific model selection.  Most products are available in several configurations.  Always consult the manufacturer's current product specifications, mechanical drawings, installation guidelines and instructions for the specific parts you plan to use in your application.

  • Proper operation of components, systems and safety controls requires an in-depth understanding of sound engineering and design practices, applicable safety regulations, laws and standards.  It is vitally important to understand the operation and stopping times of the machinery as proper installation is critical to maintaining the safety function.  Installation and verification of safe operation is the responsibility of the machinery manufacturer and user.  All products must be installed and used in accordance with the manufacturer's specifications, instructions and directions.  Northeast Technology Sales LLC does not provide installation, design, application or engineering services and assumes no responsibility for injury or damage.

  • Product information, photographs and drawings are provided by their respective companies, and are protected by Copyright or Trademark.

© 2005 - 2010 Northeast Technology Sales LLC