• Modular construction elements for industrial automation

32 and 40 mm basic sizes (32mm Lite not shown)

Concave wall feature creates lock washer effect to resist loosening

Corner profiles have reinforced inside corner to maintain alignment of cross braces

Multiple sizes of standard profiles

  Wide variety of profiles (Illustrated: Round, Trolley, 3-Slot, 45° Bevel, and 3-Sided)

Optional anodizing available

• All profiles use same connection hardware!

• All structural profiles are extruded from type 6005 T5 or 6063 T6 material (32 mm series)

• Yield - RM min. 200 n/mn3 - 35,000 PSI min. (6005 T5)

• Tensile strength RM min. 250 n/mn2 - 38,000 PSI min. (6005 T5)

• Brinell Hardness approximately 75 HB 2.5/187.5

• Anodizing - unless otherwise specified all A Lex extrusions feature etch and clear anodizing - depth (.0003 inch)

• Twist not to exceed 1/4° per foot

• Straightness .0125/ft (3mm)

• 6005 T5 and 6036 T6 are generally stable in ambient temperature range of -40°c - 200°c

• Works with both 32mm and 40mm profiles!

French door hinge kit illustrated.

• Brackets
• Panels
• Hinges
• Joining Plates
• Feet, Casters
• Pneumatic plates
• Cylinder mounts

• Workstations built to customer requirements using modular framing components.

• Ease of construction is an important design criteria of the system. One jig, one tap, two drills and a few hex wrenches are all that is needed to assemble or disassemble even the most complicated structures.
• CAD Files (DXF)