Home> Electronic Displays Inc. (EDI)

Numeric Displays

Download Numeric Displays

Counters	Up counters Up/Down counters Digit heights 2¼ to 18 inches Contact or Data inputs Aluminum enclosure
Variable Rate Counters	Rate per second, minute, hour or days optional refresh periods or user specified time intervals Digit heights 2¼ to 18 inches Contact or Data inputs Aluminum enclosure
Timers	Standard 4 digit timer in MM:sS format Separate Start/Stop and Reset inputs Available as Up Timer, Down Timer or Up/Down Timer Down timing from preset time value Many time formats available Digit heights 2¼ to 18 inches
Serial Input	RS232/RS485, Ethernet or Modem Standard ASCII Four digits standard; available up to 16 Digits Digit heights 4" to 18"
Analog to Digital Display Systems	User defined scaling factors standard or custom input ranges pre-calibrated at factory or under software control by user Software supplied with each display Available up to six digits Digit heights 2¼ to 18 inches
Clocks & Time systems	Display time in 12/24 hour format stand alone clocks, slaved from master or networked systems optional time synchronization from gPS signals or WWV (Internet) available time/temperature displays Multiple Time zone displays available Digit heights 2¼ to 18 inches

Conditions (Terms) Of Sale: All manufacturers impose legal limitations regarding the sale of their products and how they are used. Be sure you read and understand these restrictions before purchasing or using any product. Warranties, if any, are those of the manufacturer. All purchases are directly from the manufacturer or their distributors: Northeast Technology Sales LLC is a manufacturers' agent and has no authority (legal or otherwise) to change the conditions of sale, pricing, product specifications, installation procedures, operating instructions or warranty provisions.
Product photographs are intended for general illustration only and are not to scale. Specific models may differ.
Descriptions are believed accurate but, should not be relied upon for specific model selection. Most products are available in several configurations. Always consult the manufacturer's current product specifications, mechanical drawings, installation guidelines and instructions for the specific parts you plan to use in your application.
Proper operation of components, systems and safety controls requires an in-depth understanding of sound engineering and design practices, applicable safety regulations, laws and standards. It is vitally important to understand the operation and stopping times of the machinery as proper installation is critical to maintaining the safety function. Installation and verification of safe operation is the responsibility of the machinery manufacturer and user. All products must be installed and used in accordance with the manufacturer's specifications, instructions and directions. Northeast Technology Sales LLC does not provide installation, design, application or engineering services and assumes no responsibility for injury or damage.
Product information, photographs and drawings are provided by their respective companies, and are protected by Copyright or Trademark.
Copyright © Northeast Technology Sales LLC, 2012. All rights reserved.