Home> Automation Industries

Thickness & Profile Scanning Systems

sheet goods and web-based products
gypsum, wood, plywood, rubber, plastics, foams, laminates, etc.
tire tread profiles and extruded profiles
can be interfaced to mill control systems
highly accurate AccuScan systems: 0.030 cross-machine resolution; 0.005 thickness resolution
differential thickness measurement eliminates errors caused by product motion
continuous Systems replace time consuming manual measurements
control materials costs to increase profitability
AIC designs, builds and installs complete systems on a Proof of Performance basis

	AccuScan Operator Interface Display Differential cross machine thickness taper length and taper depth L/R Edge angle, trends and shapes
	AccuScan Thickness Profile Gauge Full cross-machine thickness profile multiple measurement zones Speeds to 1000 ft/Min
	C-Frame Scanners for Narrow Products Scanning applications to 24" Open-ended scanner frame Maintains stability during temperature fluctuations
	Computer Consoles SS chassis with NEMA 4 flat screen display & computer instant component access sealed keyboard and mouse pad
	Edge Profile and Width Scanner Noncontact measurement Profiles Left and Right edges and provides width measurement
	Cross Machine Profile with Edge Profile and Width Scanners Industrial grade construction Can be interfaced with mill systems Accurate grade data
	MultiDeck Press Operator Interface Display Multi Scan Zone differential thickness Upper/Lower Control Limits Sorting Functions
	Multiple Fixed-Point Laser Thickness Gauge Digital sensors from AIC Visible Lasers Proven system History, 20+ years Noncontact measurements

Conditions (Terms) Of Sale: All manufacturers impose legal limitations regarding the sale of their products and how they are used. Be sure you read and understand these restrictions before purchasing or using any product. Warranties, if any, are those of the manufacturer. All purchases are directly from the manufacturer or their distributors: Northeast Technology Sales LLC is a manufacturers' agent and has no authority (legal or otherwise) to change the conditions of sale, pricing, product specifications, installation procedures, operating instructions or warranty provisions.
Product photographs are intended for general illustration only and are not to scale. Specific models may differ.
Descriptions are believed accurate but, should not be relied upon for specific model selection. Most products are available in several configurations. Always consult the manufacturer's current product specifications, mechanical drawings, installation guidelines and instructions for the specific parts you plan to use in your application.
Proper operation of components, systems and safety controls requires an in-depth understanding of sound engineering and design practices, applicable safety regulations, laws and standards. It is vitally important to understand the operation and stopping times of the machinery as proper installation is critical to maintaining the safety function. Installation and verification of safe operation is the responsibility of the machinery manufacturer and user. All products must be installed and used in accordance with the manufacturer's specifications, instructions and directions. Northeast Technology Sales LLC does not provide installation, design, application or engineering services and assumes no responsibility for injury or damage.
Product information, photographs and drawings are provided by their respective companies, and are protected by Copyright or Trademark.
Copyright © Northeast Technology Sales LLC, 2012. All rights reserved.